SLP4-7 Triple Wave Test Kit with Wave ID and Set Reference
Triple wavelength single-mode test kits are available in two models, SLP4-7 or SLP4-FTTH. The SLP4-7 and SLP4-FTTH model combine the OPM4-4D optical power meter and either OLS7-3 (1310/1550/1625 nm) or OLS7-FTTH (1310/1490/1550 nm) LASER source respectively.

The OLS7 features triple wavelength LASER output from a single output port and is easy to operate. The LASER output is stabilized to ensure accurate test results per current TIA/EIA requirements. Each wavelength may be transmitted individually at CW or with tone modulation at frequencies of 270Hz, 330Hz, 1kHz and 2kHz. Also, each wavelength may be transmitted with Wave ID. When transmitting with Wave ID, the OLS7 will also support transmitting pairs of wavelengths in an alternating pattern and triple wavelengths in a sequential pattern. The OLS7 output port is equipped with a UCI based removable adapter to allow the output connector to be inspected and cleaned.

The OPM4-4D offers Wave ID, automatic wavelength identification and switching, when used with the OLS7. Multiple test Tone detection is provided for fiber identification. The OPM4-4D stores optical references for each calibrated wavelength. An easy to read Dual Wavelength LCD display with Backlight shows measured power [dBm or µW] or insertion loss [dB], calibrated wavelengths, tone signal [Hz], wavelength ID, and the battery charge status. The OPM4-4D optical input port accepts Noyes thread-on style adapter caps. Adapter caps are required for operation and must be ordered separately.

In addition to being powered by two AA alkaline, the OPM4-4D or OLS7 can be powered by optional AC adapter and/or rechargeable NiMH battery pack.

The OPM4-4D and OLS7 are fully N.I.S.T. traceable.