The 809-Type Repeater Case gives you above ground mounting for 12 T-Carrier repeaters for the SCL 96 carriers, T1/OS and other small cross-section T1 Carrier Systems. It provides full security for your carrier equipment, protecting them against the weather, corrosion, and insects. For added security the cover can be padlocked. The 809-Type Repeater Case is quick and easy to install, and offers easy maintenance access. It can be mounted on any pole greater than 4 inch diameter or on a pedestal that doubles as a splice closure.

The 809A3 mounts on a pole or stub, the 809B3 on a pedestal. Both are equipped with 208A Gas Tubes for lightning protection, an order-wire circuit, fault-locate filter, and a 25 foot filled, stub cable. For improved surge protection you may add the AT-9045C Protector. The stub cable is a 52-pair, 25 gauge DEPIC screened cable, the sheath filled with a “D” encapsulant for protection from water. Four 12-pair binder groups are assigned to the T-Carrier lines; the remaining four pairs are used for the fault-locate and order-wire circuits.

The mounting bracket permits the case to be rotated 95 degrees for eye level testing when pole or stub mounted. Built-in maintenance features designed to make the job easier include a dual fault-locate capability to identify the location and direction of any line trouble. Test and talk access are available through the order-wire circuit.